Solair Group

hycom

Rotating component test stands

HRCTS

The test stands are designed to perform maintenance tests according to the CMM of rotating aircraft hydraulic components such as pumps, motors, AC/DC motor pumps and power transfer units. These systems are fully computerised to provide maximum control efficiency, leading to repeatability of test procedures and accurate test results.

The test stands include following subassemblies:

•drive/generator system
•power pack with accessories
•test station cubicle
•electrical cabinet
•computer control console.

Following versions of the test stand are possible:
Pump test stand:	HPTS
Pump and motor test stand:	HPMTS
Pump and AC/DCMP test stand:	HPMPTS
Pump, motor, PTU test stand:	HRCTS

Main technical features:
Maximum high pressure:	350 bar/5000 psi. 0.28-20.7 bar/4-300 psi (at 30 ltr/min).
Maximum low pressure:	10 bar/145 psi.
Maximum flow pump/motor test circuit:	225 ltr/min – 60 USGPM.
Filtration:	HP 3 micron abs/LP 10 micron abs.
Fluid:	phosphate ester or mineral oil based fluids.
Drive power/Speed:	up to 160 kW/12000 rpm at reduced torque.
Electric DC:	0-32 VDC supply.
Electric AC:	115-200 VAC - 400 Hz control.
Cooling system:	water.
Control system:	Hycom “Advantouch” control system with manual, semi- and full automatic test mode with report generator.
PLC system:	Siemens S7 series.
PC system:	most recent industrial type.

Hycom model code:
Test stand version HNRCTS HPMTS HPMPTS HRCTS	Fluid type C=phosphate ester L=mineral oil	Drive in kW e.g. 160 kW	E/power supply e.g. E/400 V - 60 Hz	Design number 38410

Note: Various options can be added on customer’s request.